STRUCTURAL PERFORMANCE EVALUATION OF GLUED LAMINATED TIMBER WALLS
DOI:
https://doi.org/10.29183/2447-3073.MIX2020.v6.n3.83-90Keywords:
Glued Laminated Timber, Walls, Performance evaluationAbstract
The objective of this work is to determine the structural performance of glued laminated timber walls using the Brazilian standard NBR 15575 (2013). Five walls with cross-section of 9 cm x 140 cm and height of 260 cm were made, 3 of these walls of Eucalyptus cloeziana and 2 of Eucalyptus grandis. The adhesive used was resorcinol formaldehyde resin base. A physical and mechanical characterization of the wood was performed before the tests. The walls were assembled from the union of 5 glued laminated timber beams of 52 cm in length. The union was made through the male-female system, using adhesive. Simple compression, soft body and hard body impact tests were performed, according to thespecifications of NBR 15575 (2013). The boundary conditions were fixed at both ends. The instrumentation consisted of load cell and 3 displacement transducers. The load application was monotonic until reaching maximum load. The results of the simple compression tests and the soft body and hard body impact tests indicate high structural performance of the glued laminated timber walls, and, therefore, meeting the specifications of NBR 15575 (2013).References
Associação Brasileira da Indústria de Madeira Processada Mecanicamente; “Estudo setorial 2004, indústria de madeira processada mecanicamen-t e ”. Curitiba, Paraná, 52 p.,2004.
AMORIM, S.T.A.; MANTILLA, J.N.R.; CARRASCO, E.V.M.; “A madeira laminada cruzada: aspectos tecnológi-cos, construtivos e de dimensionamento” Revista Matéria, suplemento, e-11937, p. 1-7, 2017.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS, ABNT,NBR 7190 – Projeto de estruturas de madeira, Rio de Janeiro,1997, 107 p.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS, ABNT, NBR 15575 - Edificações habitacionais, Rio de Janeiro,2013, 115 p.
BALDWIN, R.F.; “Plywood and veneer-based pro-ducts: manufacturing practices”. San Francisco: M. Freeman, 388 p., 1995.
BUILDING AND CONSTRUCTION AUTHORITY;“Design for manufacturing and assembly (DfMA), Mass Engineered Timber (MET)” version 1.0, Guidebook, 75 p., 2018.
CABRAL C.P.T.; VITAL, B.R.; DELLA LUCIA, R.M.; PIMENTA, A.S.; SOARES, C.P.B.; CARVALHO, A.M.M.L.; ”Propriedades de chapas tipo OSB, fabricadas com partículas acetiladas de madeiras de Eucalyptus grandis, Eucalyptus urophylla, Eucalyptus cloezia-nae Pinus elliottii” R. Árvore, Viçosa-MG, v.30, n.4, p.659-668,2006.
IWAKIRI, S.; KEINERT JUNIOR, S.;PRATA,J.G.;ROSSO, S.;“Produção de painel compensado estrutural de Eucalyptus grandis e Eucalyptus dunnii” FLORES TA , v. 37, n. 3, p. 363-367,2007.
IWAKIRI, S.; ANDRADE, A.S.; CARDOSO JUNIOR, A.A.; CHIMPANSKI,E.R.; PRATA, J.G.; ADRIAZOLA, M.K.O.;“Produção de painéis aglomerados de alta densificação com uso de resina melaminauréia- formaldeído” Revista Cerne, v.11, p.323-328,2005.
LIMA, D.C.; MELO,R.R.; PIMENTA, A.S.; PEDROSA, T.D.; SOUZA, M.J.C.; SOUZA, E.C.; “Physical–mechanical properties of wood panel composites produced with Qualea sp. sawdust and recycled polypropyle-ne“ Environmental Science and Pollution Research, v.
, p. 4858–4865, 2020.
MACEDO, B.; FERRO, F.S.; VARANDA, L.D.; CAVALHEIRO, R.S.; CHRISTOFORO, A.L.; LAHR, F.A.R.; “Propriedades físicas de painéis aglomerados de madeira produ-zidos com adição de película de polipropileno bio-rientado”Revista Brasileira de Engenharia Agrícola e Ambiental, v.19, n.7, p.674–679,2015.
MAHR, K.; SINHA, A.; BARBOSA, A.R.; “Experimental Investigation and Modeling of Thermal Effects on a Typical Cross-Laminated Timber Bracket Shear Connection” J. Mater. Civ. Eng., v. 32, n. 6, p, 04020111, 2020.
SIKORA,K.S.;MCPOLIN,D.O.;HARTE, A.M.; “Effects of the thickness of cross-laminated timber (CLT) pa-nels made from Irish Sitka spruce on mechanical performance in bending and shear” Construction and Building Materials, v. 116, p. 141–150, 2016.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Creative Commons Copyright Notice
Attribution 4.0 International
