THE ENVIRONMENTAL IMPACT OF AN ETICS LAYER: A CASE OF STUDY WITH LIFE CYCLE ASSESSMENT (LCA) FROM ENVIRONMENTAL PRODUCT DECLARATION (EPD) IN PORTUGAL

Autores

  • Lisiane Ilha Librelotto UFSC - UNIVERSIDADE FEDERAL DE SANTA CATARINA http://orcid.org/0000-0002-3250-7813
  • Marija Kekez Polytechnic of Leiria (IPLeiria) - ESTG (Portugal) and Josip Juraj Strossmayer University of Osijek, Croatia, Faculty of Civil Engineering and Architecture
  • Helena Maria Galha Bártolo Polytechnic of Leiria (IPLeiria) – ESTG (Portugal) https://orcid.org/0000-0002-0261-9259

DOI:

https://doi.org/10.29183/2447-3073.MIX2020.v6.n2.139-148

Palavras-chave:

LCA (Life Cicle Assessment), External Thermal Insulation Composite System (ETICS), EPD (Environmental Product Declaration)

Resumo

This paper is focused on LCA (Life Cycle Assessment) of specific product based on lime used in Portugal how a more sustainable solution for building construction. This product is decorative mineral render based on lime used as final layer to an External Thermal Insulation Composite System (ETICS) based on cork boards (ICB). The case under study presents as differentials the use of cork, a natural product that has Portugal as the largest supplier in the world and mortars with a greater amount of lime and less use of cement. This is an attempt to reduce the ecological footprint by the manufacturer. In this way, this article analyses the data provided in the Environmental Product Declaration (EPD) by the manufacturer, trying to establish a comparative impact reduction with other similar products.

Biografia do Autor

Lisiane Ilha Librelotto, UFSC - UNIVERSIDADE FEDERAL DE SANTA CATARINA

Centro Tecnológico - Departamento de Arquitetura e Urbanismo.

Engenheira Civil. Mestre e Doutora em Engenharia de Pordução e Sistemas UFSC.

Helena Maria Galha Bártolo, Polytechnic of Leiria (IPLeiria) – ESTG (Portugal)

Helena Bártolo é Professora Coordenadora de Construção Sustentável no Instituto Politécnico de Leiria (IPL). Tem um Doutoramento em Gestão da Construção pela Universidade de Reading (Reino Unido), um Mestrado em Engenharia Estrutural pela Universidade do Porto e uma Licenciatura em Engenharia Civil (5 anos) pela Universidade de Coimbra. Foi Diretora da Escola Superior de Tecnologia do Instituto Politécnico do Cávado e do Ave. Foi membro da Comissão Cientifica do Curso de Estudos Avançados em Computação aplicada à Arquitectura, Urbanismo e Design (CAAUD) da Faculdade de Arquitetura da Universidade de Lisboa (FA-ULisboa) de 2013 a 2015.

Referências

BARREIRA, E.; FREITAS, V. P. de. External Thermal Insulation Composite Systems: Critical Parameters for Surface Hygrothermal Behaviour. Journal Advances in Materials Science and Engineering/2014/Article. In: < https://www.hindawi.com/journals/amse/2014/650752/>. Acess: 2020.

Building Research Insitute. National Technical Approval ITB-AT-9090/2016 Zestaw Wyrobów do Wykonywania Ocieplen Scian Zewnetrznych Budynków Systemem Atlas ETICS; Building Research Insitute: Warsaw, Poland, 2016.

CALDAS, Lucas Rosse; TOLEDO FILHO, Romildo Dias. Avaliação do Ciclo de Vida de materiais cimentícios utilizados no Brasil: estudo para o bloco de concreto e diferentes argamassas. LALCA-Revista Latino-Americana em Avaliação do Ciclo de Vida, v. 2, n. 2, p. 34-61, 2018. https://doi.org/10.18225/lalca.v2i2.4143.

Collina, A. Comfort and energy saving: the External Thermal Insulation Composite System (ETICS). 2nd Portuguese Congress on Construction Mortars (APFAC), Lisboa,Portugal, 2007.

Del Borghi, A. LCA and communication: Environmental Product Declaration. Int J Life Cycle Assess 18, 293–295 (2013). https://doi.org/10.1007/s11367-012-0513-9.

Freitas, V. P. “Isolamento térmico de fachadas pelo exterior. Reboco delgado armado sobre poliestireno expandido— ETICS,” Prof. Eng. Vasco Peixoto de Freitas, L.da-Relatorio HT ´ 191A/02. Portugal, 2002ISO 14021. Environmental labels and declarations—self-declared environmental claims (type II environmental labelling). European Standard EN ISO 14021. International Organization for Standardization. 1999.

ISO 14024 Environmental labels and declarations—type I environmental labelling—principles and procedures. European Standard EN ISO 14024. International Organization for Standardization. 1999.

ISO (2006a) Environmental labels and declarations—type III environmental declarations—principles and procedures. European Standard EN ISO 14025. International Organization for Standardization

ISO (2006b) Environmental management—life cycle assessment— principles and framework. European Standard EN ISO 14040. International Organization for Standardization

ISO (2006c) Environmental management—life cycle assessment— requirements and guidelines. European Standard EN ISO 14044. International Organization for Standardization

ISO (2007) Sustainability in building construction—environmental declaration of building products. European Standard EN ISO 21930. International Organization for Standardization.

KÜNZEL, Helmut; KÜNZEL, Hartwig M.; SEDLBAUER, Klaus. Long-term performance of external thermal insulation systems (ETICS). Acta Architectura, v. 5, n. 1, p. 11-24, 2006.

Matos, M.; Soares, L; Silva L.; Sequeira, P; Carvalho, J.. Life Cycle Assessment of an ETICS system composed of a natural insulation material: a case study of a system using an insulation cork board (ICB). In: <https://www.irbnet.de/daten/iconda/CIB_DC26483.pdf>. Acess: janeiro de 2020.

MICHAŁOWSKI, B.; Marcinek, M.; Tomaszewska, J., Czernik, S., Piasecki, M., Geryło, R., & Michalak, J.. Influence of Rendering Type on the Environmental Characteristics of Expanded Polystyrene-Based External Thermal Insulation Composite System. Buildings, v. 10, n. 3, p. 47, 2020.

MCDONOUGH, William; BRAUNGART, Michael. Cradle to cradle: Remaking the way we make things. North point press, 2010.

OK, Yong Sik et al. (Ed.). Biochar from Biomass and Waste: Fundamentals and Applications. Elsevier, 2018

PERDIGÃO, Mário Nuno Lopes Vitorino. Análise de Ciclo de Vida de duas soluções de ETICS. 2013. Tese de Doutorado. Instituto Superior de Engenharia de Lisboa. Disponível em: < https://repositorio.ipl.pt/bitstream/10400.21/3408/1/Disserta%c3%a7%c3%a3o.pdf>

UNOPS (2009) A guide to environmental labels for procurement practitioners of the United Nations system. http://www.ungm.org. Access: 26 September 2012.

Weber; Centro Habitat Portugal. Sistema DAP Ambiental. Declaração ambiental do Produto: Weber Naturcork. Disponível em: < https://www.pt.weber/files/pt/2019-05/Dap_weberevnaturkal.pdf>. Acess: Jan, 2020.

Weber. ENVIRONMENTAL PRODUCT DECLARATION: In accordance with EN 15804 and ISO 14025. In: :<https://www.lt.weber/files/lt/2020-02/EPD_LT_weber%20ip18_VF%20%2822.01.20%29.pdf> Acess: Jan, 2020.

Weber; Centro Habitat Portugal. Sistema DAP Ambiental. Declaração Ambiental do Produto: SISTEMA WEBER.THERM NATURA. 2016 Disponível em: <https://daphabitat.pt/assets/Uploads/dap/pdfs/9d6b5b1d24/Dap_Weber_w.therm_natura_CO2bio_PT_publicada_a_23.03.2016.pdf>. Acess: Jan, 2020.

Downloads

Publicado

2020-06-01

Como Citar

Librelotto, L. I., Kekez, M., & Bártolo, H. M. G. (2020). THE ENVIRONMENTAL IMPACT OF AN ETICS LAYER: A CASE OF STUDY WITH LIFE CYCLE ASSESSMENT (LCA) FROM ENVIRONMENTAL PRODUCT DECLARATION (EPD) IN PORTUGAL. IX Sustentável, 6(2), 139–148. https://doi.org/10.29183/2447-3073.MIX2020.v6.n2.139-148

Artigos mais lidos pelo mesmo(s) autor(es)

<< < 1 2 3 4 5 > >>