Deployment of manufacturing technique in a steel-and-metal industry

Authors

Keywords:

Lean manufacturing, Replicable model, Metalworking Company

Abstract

This case study presents the analysis of the implementation of lean manufacturing principles for a metalworking company sector and the lean manufacturing model replication to complementary sectors. The company is known as one of the largest manufacturers of fiberglass ladders in the country. Given the crisis experienced by the national industry, the proposed model is valid because it can be replicated and bring practical solutions and results to increase the company's productivity indexes. The implementation of the pilot project was the basis for the development of the manufacturing model in complementary sectors of the company. The following techniques were implemented: Value Stream Mapping (VSM), production line balancing, layout redesign, redesign of the standard operating procedure (SOP) after a withdrawal of activities that did not add value, 5S, 5W2H, and the intermediate stock reduction. The learning from the pilot-project implementation motivated the generation of proposals for improvements, through feedback from all involved in the project. As a result, the company achieved a balance of its activities, reducing approximately 60% of manufacturing time in bottleneck resource and 47% of movement of people and materials. The biggest gain, however, lies in the company's ability to replicate the model of one process for others.

Author Biography

João Flávio de Freitas Almeida, Universidade Federal de Minas Gerais

Departamento de Engenharia de Produção
Universidade Federal de Minas Gerais

References

Achanga, P., Shehab, E., Roy, R., Nelder, G. (2006). Critical success factors for lean implementation within SMEs. Journal of Manufacturing Technology Management, 17(4), 460-471.

Alvarez, R. dos R.; JR, J. A. V. A. (2001) Takt-Time: Conceitos e Contextualização dentro do Sistema Toyota de Produção. Gestão e Produção.

Arbix, G.; de Negri, J. A. (2005) A nova competitividade da indústria e o novo empresariado: uma hipótese de trabalho. Instituto de Estudos Avançados da Universidade de São Paulo.

Anvari, A. R., Norzima, Z., Rosnay, M. Y., Hojjati, M. S. H., & Ismail, Y. (2010). A comparative study on journey of lean manufacturing implementation. AIJSTPME, 3(2), 77-85.

Corrêa, H. L.; Corrêa C. A. (2004) Administração de Produção E Operações: Manufatura E Serviços: Uma Abordagem Estratégica. Editora Atlas SA.

Gil, A. C. (2010) Métodos e técnicas de pesquisa social. In: Ed. São Paulo: Atlas.

Harrison, A. (1992). Just-in-Time: manufacturing in perspective. Prentice Hall.

Miguel, P. (2007) Estudo de caso na engenharia de produção: estruturação e recomendações para sua condução. Produção, v.17, n.1, p. 216-229.

Oliveira, J. A. et al. (2011) Um estudo sobre a utilização de sistemas, programas e ferramentas da qualidade em empresas do interior de São Paulo. Produção, v. 21, n. 4, p. 708-723.

Ohno, T. (1997). O sistema Toyota de produção além da produção. Bookman.

Parry, G.; Mills, J. (2010), Lean competence: integration of theories in operation management practice. Supply chain management: An international journal, vol 15 No. 3, pp. 216-26.

Rother, M.; Harris, R. (2002) Criando Fluxo Contínuo: um guia de ação para gerentes, engenheiros e associados da produção. São Paulo: Lean Institute Brasil.

Shah, R. and Ward, P.T. (2003), “Lean manufacturing: context, practice bundles, and performance”, Journal of Operations Management, Vol. 21, pp. 129-49.

Slack, N., Brandon-Jones, A., Johnston, R. (2015). Administração da produção, 4ª Edição, Atlas.

Tapping, D; Luyster, T.; Shuker, T. (2002) Value Stream Management: eight steps to planning, mapping, and sustaining lean improvements. Productivity Press. New York, P.169.

Tiwari, A., Turner, C.; Sackett, P. (2007), A framework for implementing cost and quality practices within manufacturing, Journal of manufacturing Technology Management, Vol. 18, pp. 731,60.

Toledo, J. C. D., Borrás, M. Á. A., Mergulhão, R. C., Mendes, G. H. D. S. (2013). Qualidade: gestão e métodos. Rio de Janeiro: LTC, 48-62.

Womack, James P.; Jones, Daniel T. (2004) A máquina que mudou o mundo. Gulf Professional Publishing.

Website:http://www.portaldaindustria.com.br/agenciacni/noticias/2016/11/programa-brasil-mais-produtivo-vai-ampliar-produtividade-de-industrias-alagoanas/ 15 de dezembro de 2017.

Website: https://www.ibge.gov.br/estatisticas-novoportal/economicas/industria.html 17 de dezembro de 2017.

Wyrwicka, M K., Mrugalska. B. (2017) Mirages of lean manufacturing in practice. Procedia Engineering 182: 780-785.

Wu, S.; Wee, H.M. (2009), How lean supply chain effects product cost and quality – a case study of the Ford Motor Company, IEEE Conference.

Zook, C., Allen, J., Earle, N., Keen, P. (2012). Profit from the Core. Boston, MA: Harvard Business School Press.

Published

2019-04-10

Issue

Section

Artigos